MAX4659EUA-T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 25Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 362mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Nominal Supply Current | 135μA |
| Max Supply Current | 135μA |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±4.5V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| -3db Bandwidth | 225MHz |
| On-State Resistance (Max) | 25Ohm |
| Min Dual Supply Voltage | 4.5V |
| High Level Output Current | 75mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SPDT |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Crosstalk | -76dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
MAX4659EUA-T Overview
The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~85°C TA. 8 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 8 series, this electronic part has been incorporated into the system. Unlike digital switches, these are based on SPDT switching circuits. This multiplexer is composed of 1 circuits. Internally, this switch multiplexer has a resistance of 25Ohm. Datasheets for functions of 8 pins are available. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 40V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 9V should be the lowest voltage fed to the electronic component. A digital multiplexer may suffer damage if voltage is applied above 135μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. When using dual power supplies, you should attach at least 4.5V. This electrical part is compatible with 20V operating voltages.
MAX4659EUA-T Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 225MHz
MAX4659EUA-T Applications
There are a lot of Maxim Integrated MAX4659EUA-T Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- New designs requiring multiplexer functions
- DSLAMs
- USB 1.1 signal switching circuits
- 65 V DACs
- Microwave transmission systems
- Cell phones
- Industrial
- Relay replacements
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
