MAX4662EPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 12/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 2.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 56 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 55pF 55pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 275ns, 175ns |
| Charge Injection | 300pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -59dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 275ns |
| Switch-off Time-Max | 175ns |
| Normal Position | NC |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MAX4662EPE+ Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. Through Hole is where this multiplexer is located. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 16 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. There are 4 circuits in this switch device. This switch device is a typical Multiplexer or Switches. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.
MAX4662EPE+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4662EPE+ Applications
There are a lot of Maxim Integrated MAX4662EPE+ Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Battery Powered Systems
- Frame Relay Equipment
- Voice over IP/DSL – Integrated Access Devices, Smart
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Digital cross connects (DSX-1)
- Medical Instrumentation
- DVD-R
- SDH
- Sample hold systems
