MAX4663CAE

275ns, 175ns SPST - NO/NC 2.5Ohm Analog Switches BREAK-BEFORE-MAKE MAX4663 16 Pins 500pA 15V 16-SSOP (0.209, 5.30mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4663CAE
Package: 16-SSOP (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 805
Description: 275ns, 175ns SPST - NO/NC 2.5Ohm Analog Switches BREAK-BEFORE-MAKE MAX4663 16 Pins 500pA 15V 16-SSOP (0.209, 5.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.209, 5.30mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	2.5Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Base Part Number	MAX4663
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	20V
Power Supplies	12/+-15V
Number of Channels	4
Max Supply Voltage	36V
Min Supply Voltage	4.5V
Nominal Supply Current	5μA
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	250 ns
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	400 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	2.5Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	56 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	55pF 55pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	275ns, 175ns
Charge Injection	300pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-59dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	275ns
Switch-off Time-Max	175ns
Height	1.78mm
Length	6.33mm
Width	5.38mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4663CAE Overview

Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.209, 5.30mm Width). To ensure high reliability, a new packaging method Tube is used. It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around 0°C~70°C TA. There are 16 terminations totally. High-quality output is provided by the electronic component's 4 channels. A 15V voltage supply should turn on and run the electronic component. There are 16 pins injected into the electronic part body. Multiplexers built on a SPST - NO/NC switching circuit are built. Try searching for MAX4663 variants of the analog switch ic. There is 2.5Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 36V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Dual, Single supply type. 4.5V should be the lowest voltage fed to the electronic component. If put voltage greater than 500nA on the device, damage may be caused to the analogue multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. If you are using a dual power supply, you should attach at least 4.5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The electrical part can be operated at 20V voltage levels.