MAX4663EWE+

275ns, 175ns SPST - NO/NC 2.5Ohm Analog Switches BREAK-BEFORE-MAKE MAX4663 16 Pins 500pA 15V 16-SOIC (0.295, 7.50mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4663EWE+
Package: 16-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 350
Description: 275ns, 175ns SPST - NO/NC 2.5Ohm Analog Switches BREAK-BEFORE-MAKE MAX4663 16 Pins 500pA 15V 16-SOIC (0.295, 7.50mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	2.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4663
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	20V
Power Supplies	12/+-15V
Number of Channels	4
Max Supply Voltage	36V
Min Supply Voltage	4.5V
Nominal Supply Current	5μA
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	250 ns
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	400 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	2.5Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	56 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	55pF 55pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	275ns, 175ns
Charge Injection	300pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-59dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	275ns
Switch-off Time-Max	175ns
Height Seated (Max)	2.65mm
Length	10.3mm
Width	7.5mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

MAX4663EWE+ Overview

Packed in 16-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Try searching for the analog switch ic with MAX4663 if you are looking for variants. There is 2.5Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 36V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 4.5V. The analogue multiplexer may be damaged if voltage is greater than 500nA. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIf you are using a dual power supply, you should attach at least 4.5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The electrical part can be operated at 20V voltage levels.