MAX4665CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | DIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SPST |
| Max Supply Current | 500nA |
| Turn On Delay Time | 275 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 175 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4665CPE+ Overview
Packed in DIP, the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 16 pins are injected into the electrical part body. A 4 circuit is present in this switch device. As far as internal resistance is concerned, it has 4Ohm. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 36V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 4.5V is the lowest voltage the electrical component should receive. Putting voltage greater than 500nA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. Integrated with SPST analog IC. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Temperatures above 70°C should not be used to operate the switches.
MAX4665CPE+ Features
1 Channels
MAX4665CPE+ Applications
There are a lot of Maxim Integrated MAX4665CPE+ Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Avionics
- Automatic test equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Modems
- MP3 players
- Audio/video switches
- Industrial and process control systems
- CSU
- Audio and video routing
