Parameters |
Base Part Number |
MAX4666 |
Pin Count |
16 |
Operating Supply Voltage |
20V |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Max Supply Voltage |
36V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
1nA |
Nominal Supply Current |
5μA |
Max Supply Current |
500nA |
Throw Configuration |
SPST |
Turn On Delay Time |
250 ns |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
400 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
4Ohm |
Min Dual Supply Voltage |
4.5V |
High Level Output Current |
100mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
34pF 34pF |
On-state Resistance Match-Nom |
0.2Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
275ns, 175ns |
Charge Injection |
300pC |
Channel-to-Channel Matching (ΔRon) |
200m Ω |
Crosstalk |
-60dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
275ns |
Switch-off Time-Max |
175ns |
Height |
2.35mm |
Length |
10.5mm |
Width |
7.6mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
8Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
696mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
MAX4666CSE Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around 0°C~70°C TA. The total number of terminations is 16. A high-quality output is provided by the electrical component's 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. A SPST - NO/NC switching circuit is used to build these analog multiplexers. Try searching with MAX4666 to find analog multiplexer variants. In this multiplexer, the internal resistance is 8Ohm. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 36V. A analog switch ic that has a cost-effective Dual, Single supply type. 4.5V should be the lowest voltage fed to the electronic component. 1nA current would be enough for this multiplexer to operate. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. You should attach at least 4.5V voltage if you are using dual power supply. This electrical part is compatible with 20V operating voltages.
MAX4666CSE Features
4 Channels
Switch Circuit: SPST - NO/NC
1nA Supply Current
MAX4666CSE Applications
There are a lot of Maxim Integrated MAX4666CSE Analog Switches & Multiplexers ICs applications.
- ATM
- Medical
- Isolation
- Remote Powered Equipment
- E1 Network Equipment
- Cable Modem
- CSU
- Channelized and Unchannelized DS3 applications
- Communication systems
- Multi-Line E1 Interface Cards