MAX4667CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 2.5Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4667 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 2.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 65pF 65pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 275ns, 175ns |
| Charge Injection | 450pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -66dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 300ns |
| Normal Position | NO |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
MAX4667CPE Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around 0°C~70°C TA. Total terminations are 16. Due to its 1 channels, the electrical component produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. A SPST - NC switching circuit is used for these analog switches. There are 2 circuits in this switch device. Search with MAX4667 if you are looking for analog multiplexer variants. This digital multiplexer has 2.5Ohm internal resistance. The analog multiplexer shown here is a typical Multiplexer or Switches. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.
MAX4667CPE Features
1 Channels
Switch Circuit: SPST - NC
MAX4667CPE Applications
There are a lot of Maxim Integrated MAX4667CPE Analog Switches & Multiplexers ICs applications.
- CSU
- High speed data transmission line cards
- ISDN NT1/TA
- Digital access cross connects
- Remote Powered Equipment
- 65 V DACs
- Cellular phones
- SONET/SDH ADM
- Fiber In The Loop (FITL)
- Audio and video routing
