MAX4667ESE

275ns, 175ns SPST - NC 2.5Ohm Analog Switches BREAK-BEFORE-MAKE MAX4667 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4667ESE
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 333
Description: 275ns, 175ns SPST - NC 2.5Ohm Analog Switches BREAK-BEFORE-MAKE MAX4667 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	2.5Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4667
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	20V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	4.5V
Nominal Supply Current	1nA
Max Supply Current	500nA
Throw Configuration	SPST
Turn On Delay Time	130 ns
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	90 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	2.5Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	65pF 65pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	275ns, 175ns
Charge Injection	450pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-66dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Switch-off Time-Max	300ns
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant

MAX4667ESE Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tube. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. The analog switch ics are built using SPST - NC switching circuits. There are 2 circuits in this multiplexer. Try searching for MAX4667 variants of the analog switch ic. A 2.5Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 36V. A cost-effective Dual, Single supply type analogue multiplexer. 4.5V is the lowest voltage that should be fed to the electronic electronic part. If put voltage greater than 500nA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. A dual power supply should have at least 4.5V voltage attached. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. 20V operating voltages can be used with this electrical part.