Parameters |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
MATTE TIN |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
MAX4668 |
Pin Count |
16 |
JESD-30 Code |
R-PDIP-T16 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Number of Circuits |
2 |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±4.5V~20V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
On-State Resistance (Max) |
2.5Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
65pF 65pF |
On-state Resistance Match-Nom |
0.05Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
275ns, 175ns |
Charge Injection |
450pC |
Channel-to-Channel Matching (ΔRon) |
50m Ω |
Crosstalk |
-66dB @ 1MHz |
Switch-on Time-Max |
400ns |
Switch-off Time-Max |
300ns |
Length |
19.175mm |
RoHS Status |
ROHS3 Compliant |
MAX4668EPE+ Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. This electronic part can be found in the 16 series. Unlike digital switches, these are based on SPST - NO switching circuits. 2 circuits are used in this analogue multiplexer. Try searching with MAX4668 to find analog multiplexer variants.
MAX4668EPE+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4668EPE+ Applications
There are a lot of Maxim Integrated MAX4668EPE+ Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Digital Cross-Connects
- Microprocessor controlled systems
- PDAs
- RGB switches
- Modems
- Routers
- Battery-powered systems
- Fault Tolerant Systems
- Ultrasound