MAX4674EEE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4674 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Supply Current-Max (Isup) | 0.001mA |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 20pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 18ns, 6ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -114dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 22ns |
| Switch-off Time-Max | 8ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.73mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4674EEE+ Overview
Due to its 16-SSOP (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Totally, there are 16 terminations. The electronic part provides high-quality output because it has 2 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. An injection of 16 pins is performed into the body of the electrical component. A SPDT switching circuit is used to build these analog multiplexers. Circuits number 4 make up this analogue multiplexer. Try searching with MAX4674 if you're looking for variants. The analog multiplexer shown here is a typical Multiplexer or Switches. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE WITH 5V SUPPLY.
MAX4674EEE+ Features
2 Channels
Switch Circuit: SPDT
Additional Features: CAN ALSO OPERATE WITH 5V SUPPLY
MAX4674EEE+ Applications
There are a lot of Maxim Integrated MAX4674EEE+ Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Video switching
- Avionics
- Audio and video switching
- PDH Multiplexers
- Wireless Local Loop
- Sample-and-hold systems
- Switching Systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Channel Banks
