MAX4674ESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4674 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Turn On Delay Time | 22 ns |
| Logic Function | Multiplexer |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.001mA |
| Turn-Off Delay Time | 8 ns |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 20pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 18ns, 6ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -114dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4674ESE+T Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 2 channels. An 3V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 16 series. These analog multiplexers are built based on SPDT switching circuits. There are 4 circuits in this switch device. Use MAX4674 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 4Ohm. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 1.8V. This digital switch can be operated with a current of 1μA. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. A voltage of 5V can be used to operate the electronic component. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE WITH 5V SUPPLY.
MAX4674ESE+T Features
2 Channels
Switch Circuit: SPDT
1μA Supply Current
Additional Features: CAN ALSO OPERATE WITH 5V SUPPLY
MAX4674ESE+T Applications
There are a lot of Maxim Integrated MAX4674ESE+T Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Medical
- Automatic test equipment
- Imaging
- Sample-and-hold systems
- ISDN NT1/TA
- Isolation
- Audio and video routing
- Fiber to the Home
- PDAs
