MAX4674ETE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 4Ohm |
| Base Part Number | MAX4674 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Logic Function | Multiplexer |
| Supply Type | Single |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 20pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 18ns, 6ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -114dB @ 1MHz |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4674ETE+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-WQFN Exposed Pad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~85°C TA extended. On the other hand, analog switches can be constructed using SPDT switching circuits. This multiplexer is composed of 4 circuits. Try searching with MAX4674 if you're looking for variants. An switch multiplexer with 4Ohm internal resistance has a value of 4Ohm. To find out what the 16 pins do, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Single supply type digital switch with a low cost. It is recommended to use 1.8V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 1μA. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V.
MAX4674ETE+T Features
Switch Circuit: SPDT
1μA Supply Current
MAX4674ETE+T Applications
There are a lot of Maxim Integrated MAX4674ETE+T Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Intelligent PBX
- CSU
- FTTH
- Cellular phones
- Microprocessor Controlled Analog Systems
- SONET
- Medical Instrumentation
- Fault Tolerant Systems
- Cable Modem
