Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
CAN ALSO OPERATE WITH 5V SUPPLY |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4674 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3/5V |
Number of Channels |
2 |
Number of Circuits |
4 |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Supply Current-Max (Isup) |
0.001mA |
On-State Resistance (Max) |
4Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
67 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
10pF 20pF |
On-state Resistance Match-Nom |
0.15Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
18ns, 6ns |
Charge Injection |
10pC |
Channel-to-Channel Matching (ΔRon) |
150m Ω |
Crosstalk |
-114dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
22ns |
Switch-off Time-Max |
8ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Height Seated (Max) |
1.1mm |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
MAX4674EUE+ Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~85°C TA degrees Celsius. 16 terminations have been made so far. High-quality output is provided by the electronic component's 2 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SPDT switching circuit is used to build these analog multiplexers. There are 4 circuits in this multiplexer. Try searching with MAX4674 if you're looking for variants. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. This electronic part has additional features, such as: CAN ALSO OPERATE WITH 5V SUPPLY.
MAX4674EUE+ Features
2 Channels
Switch Circuit: SPDT
Additional Features: CAN ALSO OPERATE WITH 5V SUPPLY
MAX4674EUE+ Applications
There are a lot of Maxim Integrated MAX4674EUE+ Analog Switches & Multiplexers ICs applications.
- Medical Instrumentation
- Industrial
- Medical systems
- Precision test equipment
- Cellular phones
- Switching Systems
- Audio and video switching
- Battery Powered Instruments
- Avionics
- Precision data acquisition