MAX4674EUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4674 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Supply Current-Max (Isup) | 0.001mA |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 20pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 18ns, 6ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -114dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 22ns |
| Switch-off Time-Max | 8ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX4674EUE+T Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 16. A 2 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. Into the electrical component body are injected 16 pins. A SPDT switching circuit is used to build these analog multiplexers. There are 4 circuits in this switch device. MAX4674 can be used to search for analog multiplexer variants. Multiplexer or Switches is a typical switch device. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. Check out the electrical component's additional features, such as the following: CAN ALSO OPERATE WITH 5V SUPPLY.
MAX4674EUE+T Features
2 Channels
Switch Circuit: SPDT
Additional Features: CAN ALSO OPERATE WITH 5V SUPPLY
MAX4674EUE+T Applications
There are a lot of Maxim Integrated MAX4674EUE+T Analog Switches & Multiplexers ICs applications.
- DSLAMs
- 65 V DACs
- Remote wireless modules
- Digital access cross connects
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Isolation
- Frame Relay Equipment
- Communications systems
- Sample-and-hold systems
- Video switching
