MAX4676EUT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4676 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.7V~5.5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 3Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 85pF 85pF |
| On-state Resistance Match-Nom | 0.7Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 300ns, 110ns |
| Charge Injection | 87pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Normal Position | NC |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4676EUT+T Overview
Packed in SOT-23-6, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. In total, there are 6 terminations. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. As part of its design, the 6 series is equipped with this electronic component. The analog switch ics are built using SPST - NC switching circuits. This multiplexer is composed of 1 circuits. Search with MAX4676 if you are looking for analog multiplexer variants. The analog multiplexer shown here is a typical Multiplexer or Switches.
MAX4676EUT+T Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 250MHz
MAX4676EUT+T Applications
There are a lot of Maxim Integrated MAX4676EUT+T Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- DVD-R
- Data Acquisition Systems
- Microwave transmission systems
- PBXs
- Multi-Line E1 Interface Cards
- Relay replacements
- USB 1.1 signal switching circuits
- Public switching systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
