MAX4685ETB+

50ns, 30ns SPDT 800mOhm DUAL Analog Switches 10 Pins 1nA 3V 10-WFDFN Exposed Pad

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4685ETB+
Package: 10-WFDFN Exposed Pad
Datasheet: PDF
Stock: 368
Description: 50ns, 30ns SPDT 800mOhm DUAL Analog Switches 10 Pins 1nA 3V 10-WFDFN Exposed Pad(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	10-WFDFN Exposed Pad
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~85°C
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Terminal Finish	Matte Tin (Sn)
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Pin Count	10
Qualification Status	Not Qualified
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
On-State Resistance (Max)	800mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	84pF 37pF
On-state Resistance Match-Nom	0.06Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	50ns, 30ns
Charge Injection	200pC
Channel-to-Channel Matching (ΔRon)	60m Ω (Typ)
Crosstalk	-68dB @ 100kHz
Switch-on Time-Max	50ns
Switch-off Time-Max	30ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Height Seated (Max)	0.8mm
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant

MAX4685ETB+ Overview

Due to its 10-WFDFN Exposed Pad packaging, the electronic part is convenient for international shipping. The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C degrees Celsius. The total number of terminations is 10. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 10 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. The multiplexer consists of 2 circuits. Datasheets for functions of 10 pins are available. Users should never supply a voltage higher than 5.5V to a switch device. A low voltage of 1.8V should be applied to the electronic component. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts.