Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.209, 5.30mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
1.25Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
571mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
2 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX4690 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Operating Supply Voltage |
20V |
Number of Channels |
2 |
Max Supply Voltage |
36V |
Min Supply Voltage |
4.5V |
Nominal Supply Current |
5μA |
Max Supply Current |
500nA |
Throw Configuration |
SPST |
Turn On Delay Time |
250 ns |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
400 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
1.25Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
53 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
115pF 115pF |
On-state Resistance Match-Nom |
0.09Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
275ns, 175ns |
Charge Injection |
550pC |
Channel-to-Channel Matching (ΔRon) |
90m Ω |
Crosstalk |
-65dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
300ns |
Normal Position |
NC |
Height Seated (Max) |
1.99mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX4690EAE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SSOP (0.209, 5.30mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. As a result of its 2 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. A SPST - NO switching circuit is used for these analog switches. Search with MAX4690 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 1.25Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 36V voltage to the switch device. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage the electronic part should receive is 4.5V. When the digital multiplexer is charged above 500nA, damage can occur. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 4.5V. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages of 20V are compatible with the electrical part.
MAX4690EAE Features
2 Channels
Switch Circuit: SPST - NO
MAX4690EAE Applications
There are a lot of Maxim Integrated MAX4690EAE Analog Switches & Multiplexers ICs applications.
- Multiplexers
- Frame Relay Equipment
- Power routing
- Digital access cross connects
- Relay replacements
- Public switching systems
- Battery-powered systems
- USB 1.1 signal switching circuits
- CSU
- Cable Telephony – NIU, Set-Top Box, Home Side Box