MAX4691EGE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4691 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±2V~5.5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 68pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 100ns |
| Charge Injection | 0.1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -75dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 60ns |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MAX4691EGE+ Overview
Presented in 16-VQFN Exposed Pad, this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. 8:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. In total, there are 16 terminations. A 8 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. It is injected into the electrical part body with 16 pins. The circuits in this analogue multiplexer number 1. Look for analog switch ic variants by searching with MAX4691. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER.
MAX4691EGE+ Features
8 Channels
MAX4691EGE+ Applications
There are a lot of Maxim Integrated MAX4691EGE+ Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Precision data acquisition
- Routers
- Communication systems
- FTTH
- DSLAMs
- Intelligent PBX
- RGB switches
- Battery Powered Systems
- Cellular phones
