MAX4692EGE-T
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4692 |
| Pin Count | 16 |
| JESD-30 Code | S-PQCC-N16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±2V~5.5V |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 68pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 100ns |
| Charge Injection | 0.1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -75dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 80ns |
| Switch-off Time-Max | 50ns |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
MAX4692EGE-T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-VQFN Exposed Pad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. By its 4 channels, the electronic component provides high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. Based on SP4T switching circuits, these analog multiplexers work. It consists of 2 circuits. Look for analog switch ic variants by searching with MAX4692. There is a standard Multiplexer or Switches analogue multiplexer here. Integrated with DIFFERENTIAL MULTIPLEXER analog IC.
MAX4692EGE-T Features
4 Channels
Switch Circuit: SP4T
MAX4692EGE-T Applications
There are a lot of Maxim Integrated MAX4692EGE-T Analog Switches & Multiplexers ICs applications.
- Communication systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Central office
- Medical
- Automatic test equipment
- Microprocessor controlled systems
- Medical Instrumentation
- Audio and video switching
- Data switching
- Routers
