MAX4692ETE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.349W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX4692 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 1μA |
| Turn On Delay Time | 90 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±2V~5.5V |
| Supply Current-Max (Isup) | 0.001mA |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 5.5V |
| On-State Resistance (Max) | 70Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 68pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 100ns |
| Charge Injection | 0.1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -75dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4692ETE+ Overview
As the electronic part is packed in 16-WQFN Exposed Pad, international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. 4:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. In total, 16 terminations have occurred. Due to its 4 channels, the electrical component produces high-quality output. A SP4T switching circuit is used to build these analog multiplexers. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with MAX4692. Analog switches have 70Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 11V. In order for the electronic part to function properly, the lowest voltage should be 2V. The analogue multiplexer could operate on 1μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5.5V. For dual power supplies, a voltage of at least 2V should be attached. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. Operating voltages range from 5.5V.
MAX4692ETE+ Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4692ETE+ Applications
There are a lot of Maxim Integrated MAX4692ETE+ Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Isolation
- Data Acquisition Systems
- Audio and video signal routing
- Communication systems
- Cell phones
- Access Concentrators
- Industrial and process control systems
- SONET
- MP3 players
