MAX4692ETE+T
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4692 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2V |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±2V~5.5V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5.5V |
| On-State Resistance (Max) | 70Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 68pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 100ns |
| Charge Injection | 0.1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -75dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 60ns |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | QUAD |
MAX4692ETE+T Overview
This electronic part is conveniently packaged in 16-WQFN Exposed Pad, making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. Electronic part bodies are injected with 16 pins. Based on SP4T switching circuits, these analog multiplexers work. Circuits number 2 make up this analogue multiplexer. MAX4692 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 70Ohm. Datasheets for functions of 16 pins are available. It is generally not recommended to supply a voltage higher than 11V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2V as the lowest voltage for the electrical part. Despite this switch device's dual supply capability, its voltage should not exceed 5.5V. When using dual power supplies, you should attach at least 2V.
MAX4692ETE+T Features
4 Channels
Switch Circuit: SP4T
MAX4692ETE+T Applications
There are a lot of Maxim Integrated MAX4692ETE+T Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Medical Instrumentation
- ATM
- CSU
- SONET/SDH ADM
- Industrial control systems
- Digital access cross connects
- PBXs
- Microprocessor controlled systems
- E1 Network Equipment
