MAX4693EGE-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4693 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | S-PQCC-N16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±2V~5.5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 68pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 100ns |
| Charge Injection | 0.1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -75dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 80ns |
| Switch-off Time-Max | 50ns |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4693EGE-T Overview
Shipping overseas is convenient with the electronic component packed in 16-VQFN Exposed Pad. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. This electronic part offers high-quality output due to its 1 channels. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the body of the electronic part. Multiplexers built on a SPDT switching circuit are built. A 3 circuit is present in this switch device. Try searching for MAX4693 variants of the analog switch ic. Theswitch device is a typical Multiplexer or Switches. There are SEPARATE OUTPUT outputs on this analog switch ic.
MAX4693EGE-T Features
1 Channels
Switch Circuit: SPDT
MAX4693EGE-T Applications
There are a lot of Maxim Integrated MAX4693EGE-T Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- PBX interfaces
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Audio and video signal routing
- Residential Gateways, Home Gateway/Router
- Digital access cross connects
- Isolation
- DVD-R
- Communications systems
- Frame Relay Equipment
