MAX4693ETE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70Ohm |
| Terminal Finish | TIN |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4693 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2V |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±2V~5.5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5.5V |
| On-State Resistance (Max) | 70Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 68pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 100ns |
| Charge Injection | 0.1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -75dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 60ns |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4693ETE+T Overview
Shipping overseas is convenient due to the electrical component's packing in 16-WQFN Exposed Pad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Operation at a temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPDT switching circuits. This multiplexer is composed of 3 circuits. MAX4693 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 70Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 11V. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2V. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5.5V. A dual power supply should have at least 2V voltage attached. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.
MAX4693ETE+T Features
1 Channels
Switch Circuit: SPDT
MAX4693ETE+T Applications
There are a lot of Maxim Integrated MAX4693ETE+T Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Audio/video switches
- Digital Cross-Connects
- Precision data acquisition
- DSUs
- PDH Multiplexers
- Data Acquisition Systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Battery Powered Instruments
- MP3 players
