MAX4695EGC+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4695 |
| Output | SEPARATE OUTPUT |
| Pin Count | 12 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.3V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 30ns, 18ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -82dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 30ns |
| Switch-off Time-Max | 18ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4695EGC+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 12-VFQFN Exposed Pad. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. In total, 12 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. A key feature of the 12 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SPDT switching circuit are built. It consists of 2 circuits. Try searching with MAX4695 to find analog multiplexer variants. The analogue multiplexer in this example is a typical Multiplexer or Switches. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.
MAX4695EGC+ Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 300MHz
MAX4695EGC+ Applications
There are a lot of Maxim Integrated MAX4695EGC+ Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- SONET/SDH ADM
- Communications systems
- SONET
- Power routing
- Sample hold systems
- Digital Cross-Connects
- Routers
- Cross Connects
- PBX interfaces
