MAX4695ETC+
| Parameters | |
|---|---|
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 30ns, 18ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -82dB @ 1MHz |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 330mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4695 |
| Pin Count | 12 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 18 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
MAX4695ETC+ Overview
This electronic part is conveniently packaged in 12-WFQFN Exposed Pad, making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. Totally, there are 12 terminations. The electronic part delivers high-quality output through its 1 channels. With a 3V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 12 series of products. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 2 circuits in this switch device. Try searching with MAX4695 if you're looking for variants. In this multiplexer, the internal resistance is 60Ohm. The datasheets for the 12 pins explain the functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. 1.8V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 1μA would be sufficient for this switch device. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. Operating voltages range from 5V.
MAX4695ETC+ Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 300MHz
MAX4695ETC+ Applications
There are a lot of Maxim Integrated MAX4695ETC+ Analog Switches & Multiplexers ICs applications.
- Cable Modem
- PBXs
- Cross Connects
- T1/E1 Terminals
- HDTV
- 65 V DACs
- Precision data acquisition
- Medical Instrumentation
- SONET
- Private Branch Exchange (PBX)
