MAX4700CPE

275ns, 175ns SPST - NO/NC 1.25Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4700 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4700CPE
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 404
Description: 275ns, 175ns SPST - NO/NC 1.25Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4700 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	15V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4700
Output	SEPARATE OUTPUT
Pin Count	16
JESD-30 Code	R-PDIP-T16
Qualification Status	Not Qualified
Number of Channels	1
Number of Circuits	2
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup)	-15V
On-State Resistance (Max)	1.25Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	53 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	115pF 115pF
On-state Resistance Match-Nom	0.09Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	275ns, 175ns
Charge Injection	550pC
Channel-to-Channel Matching (ΔRon)	90m Ω
Crosstalk	-65dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Switch-off Time-Max	300ns
Length	19.175mm
RoHS Status	Non-RoHS Compliant

MAX4700CPE Overview

Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around 0°C~70°C TA. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. 16 pins are injected to the electronic part body. SPST - NO/NC switching circuits are used in these analog switch ics. The multiplexer consists of 2 circuits. Try searching with MAX4700 if you're looking for variants. The analog multiplexer shown here is a typical Multiplexer or Switches. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.