MAX4700CWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 53 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 115pF 115pF |
| On-state Resistance Match-Nom | 0.09Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 275ns, 175ns |
| Charge Injection | 550pC |
| Channel-to-Channel Matching (ΔRon) | 90m Ω |
| Crosstalk | -65dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 175ns |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MAX4700CWE+ Overview
This electronic part is conveniently packaged in 16-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around 0°C~70°C TA extended. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. Electronic part bodies are injected with 16 pins. A SPST - NO/NC switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. The analogue multiplexer in this example is a typical Multiplexer or Switches. This analog switch ic utilizes SEPARATE OUTPUT output.
MAX4700CWE+ Features
1 Channels
Switch Circuit: SPST - NO/NC
MAX4700CWE+ Applications
There are a lot of Maxim Integrated MAX4700CWE+ Analog Switches & Multiplexers ICs applications.
- Battery-powered systems
- Wireless Local Loop
- RGB switches
- Communication systems
- Transmit
- Microwave transmission systems
- Cellular phones
- Isolation
- 65 V DACs
- Precision test equipment
