Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.209, 5.30mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
1.25Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
2 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX4700 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Number of Channels |
1 |
Number of Circuits |
2 |
Max Supply Voltage |
36V |
Min Supply Voltage |
4.5V |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±4.5V~20V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
1.25Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
53 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
115pF 115pF |
On-state Resistance Match-Nom |
0.09Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
275ns, 175ns |
Charge Injection |
550pC |
Channel-to-Channel Matching (ΔRon) |
90m Ω |
Crosstalk |
-65dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
400ns |
Switch-off Time-Max |
300ns |
Height Seated (Max) |
1.99mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
MAX4700EAE Overview
Presented in 16-SSOP (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. Based on SPST - NO/NC switching circuits, these analog multiplexers work. This multiplexer is composed of 2 circuits. Search with MAX4700 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 1.25Ohm. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. A low voltage of 4.5V should be applied to the electronic component. For this switch, a dual supply voltage is feasible, but it must not exceed 20VWith dual power supplies, you should attach at least 4.5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.
MAX4700EAE Features
1 Channels
Switch Circuit: SPST - NO/NC
MAX4700EAE Applications
There are a lot of Maxim Integrated MAX4700EAE Analog Switches & Multiplexers ICs applications.
- DSUs
- Sample hold systems
- Video switching
- Medical Instrumentation
- Avionics test equipment
- Channel Banks
- Cellular phones
- Digital Cross-Connects
- Battery-powered systems
- High speed data transmission line cards