MAX4701EUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4701 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 35ns, 20ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -79dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX4701EUE+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:2. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 2 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using DPDT switching circuits. The multiplexer consists of 2 circuits. Try searching with MAX4701 to find analog multiplexer variants. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX4701EUE+ Features
2 Channels
Switch Circuit: DPDT
-3db Bandwidth: 250MHz
MAX4701EUE+ Applications
There are a lot of Maxim Integrated MAX4701EUE+ Analog Switches & Multiplexers ICs applications.
- Cable PC
- Microwave transmission systems
- Public switching systems
- Medical Instrumentation
- Signal routing between systems
- T1/E1 Terminals
- MP3 players
- Communication systems
- Avionics
- HDTV
