MAX4702EUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 2.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4702 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 35ns, 20ns |
| Charge Injection | 0.5pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -79dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 35ns |
| Switch-off Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX4702EUE+ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. A total of 16 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. Unlike digital switches, these are based on SPDT switching circuits. A 4 circuit is present in this switch device. Using the MAX4702 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 2.5Ohm. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
MAX4702EUE+ Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 250MHz
MAX4702EUE+ Applications
There are a lot of Maxim Integrated MAX4702EUE+ Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- Digital Cross-Connects
- Residential Gateways, Home Gateway/Router
- Sample hold systems
- Audio and video routing
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Public switching systems
- Digital cross connects (DSX-1)
- Communications systems
- PBXs
