MAX4704EGC+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4704 |
| Pin Count | 12 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.3V |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 60ns, 20ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Signal Current-Max | 0.02A |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4704EGC+ Overview
Shipping overseas is convenient with the electronic component packed in 12-VFQFN Exposed Pad. This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. 4:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 12. A 4 channel electronic part produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. There are 12 pins injected into the electronic part body. A SP4T switching circuit is used for these analog switches. This multiplexer is composed of 1 circuits. Search with MAX4704 if you are looking for analog multiplexer variants. Multiplexer or Switches is a typical switch device. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs.
MAX4704EGC+ Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 200MHz
MAX4704EGC+ Applications
There are a lot of Maxim Integrated MAX4704EGC+ Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Remote Powered Equipment
- Cell phones
- CSU
- SONET/SDH ADM
- Optical Applications
- PDAs
- Routers
- Digital Cross-Connects
- Channelized and Unchannelized DS3 applications
