MAX4704ETC+T
| Parameters | |
|---|---|
| Package / Case | 12-WFQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4704 |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Logic Function | Multiplexer |
| Supply Type | Single |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 60ns, 20ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
MAX4704ETC+T Overview
This electronic part is conveniently packaged in 12-WFQFN Exposed Pad, making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. In total, there have been 12 terminations. High-quality output is provided by the electronic component's 4 channels. On the other hand, analog switches can be constructed using SP4T switching circuits. A total of 1 circuits make up this switch device. Look for analog switch ic variants by searching with MAX4704. Internally, this switch multiplexer has a resistance of 60Ohm. For details about the functions of 12 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Single supply type digital switch with a low cost. There should be 1.8V voltage fed to the electrical part below 1.8V. In order to operate this switch device, it would need a current of 1μA. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage.
MAX4704ETC+T Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
-3db Bandwidth: 200MHz
MAX4704ETC+T Applications
There are a lot of Maxim Integrated MAX4704ETC+T Analog Switches & Multiplexers ICs applications.
- CSU
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Battery Powered Instruments
- Precision data acquisition
- Audio and video routing
- Private Branch Exchange (PBX)
- Precision instrumentation
- Relay replacements
- Remote wireless modules
- ATM
