MAX4704EUB+T

60ns, 20ns SP4T 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4704 10 Pins 100pA 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4704EUB+T
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 824
Description: 60ns, 20ns SP4T 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4704 10 Pins 100pA 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	60Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	330mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4704
Pin Count	10
Operating Supply Voltage	5V
Number of Channels	4
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1μA
Propagation Delay	60 ns
Turn On Delay Time	60 ns
Logic Function	Multiplexer
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	20 ns
On-State Resistance (Max)	60Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	7pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	60ns, 20ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.8V~5.5V
Signal Current-Max	0.02A
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4704EUB+T Overview

Packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. The operating temperature is extended to around -40°C~85°C TA. In total, there are 10 terminations. By its 4 channels, the electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 10 pins. Multiplexers built on a SP4T switching circuit are built. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with MAX4704. Internally, this switch multiplexer has a resistance of 60Ohm. Datasheets for functions of 10 pins are available. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. There should be 1.8V voltage fed to the electrical part below 1.8V. For this digital switch to work, 1μA current would suffice. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. Operating voltages of 5V are compatible with the electrical part. The transfer of data can be performed over 200MHz bandwidths.