MAX4706EXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4706 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3/3.3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 190MHz |
| On-State Resistance (Max) | 3Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 17pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 20ns, 15ns |
| Charge Injection | 5pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Normal Position | NC |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
MAX4706EXK+T Overview
Presented in 5-TSSOP, SC-70-5, SOT-353, this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operation at a temperature around -40°C~85°C TA. In total, 5 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. An 3.3V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 5 pins. Unlike digital switches, these are based on SPST - NC switching circuits. A total of 1 circuits make up this switch device. Using the MAX4706 search parameter, you can discover variants of the switch. Multiplexer or Switches is a typical switch device. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source.
MAX4706EXK+T Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 190MHz
MAX4706EXK+T Applications
There are a lot of Maxim Integrated MAX4706EXK+T Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- Cable PC
- Battery-powered systems
- ATM
- Multi-Line E1 Interface Cards
- MP3 players
- Residential Gateways, Home Gateway/Router
- Communication systems
- PBX interfaces
- SDH
