MAX4708EPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4708 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~20V |
| Supply Current-Max (Isup) | 0.75mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 19pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Time (Ton, Toff) (Max) | 275ns, 200ns |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Crosstalk | -62dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 250ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MAX4708EPE+ Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. 8:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. As part of its design, the 16 series is equipped with this electronic component. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with MAX4708. A analogue multiplexer of this type is a Multiplexer or Switches. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board.
MAX4708EPE+ Features
8 Channels
MAX4708EPE+ Applications
There are a lot of Maxim Integrated MAX4708EPE+ Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Audio signal routing
- Optical Applications
- Ultrasound
- Industrial and process control systems
- Cross Connects
- Voice over IP/DSL – Integrated Access Devices, Smart
- Audio and video routing
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
