MAX4708EPE

275ns, 200ns 400Ohm Analog Switches BREAK-BEFORE-MAKE MAX4708 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4708EPE
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 491
Description: 275ns, 200ns 400Ohm Analog Switches BREAK-BEFORE-MAKE MAX4708 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	400Ohm
Max Power Dissipation	842mW
Technology	CMOS
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4708
Pin Count	16
Operating Supply Voltage	28V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	36V
Min Supply Voltage	9V
Operating Supply Current	525μA
Propagation Delay	350 ns
Turn On Delay Time	500 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~20V
Supply Type	Dual, Single
Supply Current-Max (Isup)	0.75mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	400Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	10pF 19pF
On-state Resistance Match-Nom	15Ohm
Switch Time (Ton, Toff) (Max)	275ns, 200ns
Channel-to-Channel Matching (ΔRon)	15 Ω (Max)
Crosstalk	-62dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Signal Current-Max	0.03A
Height Seated (Max)	4.572mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX4708EPE Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. 8:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. This multiplexer is composed of 1 circuits. Try searching with MAX4708 to find analog multiplexer variants. As far as internal resistance is concerned, it has 400Ohm. Please refer to the datasheets for 16 pins functions. In normalcircumstances, users should not exceed 36V volts for the multiplexer. The digital multiplexer has a low cost Dual, Single supply. In order for the electronic part to function properly, the lowest voltage should be 9V. In order to operate this switch device, it would need a current of 525μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 20V. It is recommended that you attach at least 4.5V to your dual power supply. Operating voltages range from 28V.