MAX4709EPE

275ns, 200ns 400Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4709EPE
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 753
Description: 275ns, 200ns 400Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
ECCN Code	EAR99
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	20
Pin Count	16
Number of Channels	4
Number of Circuits	1
Max Supply Voltage	36V
Min Supply Voltage	9V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~20V
Supply Current-Max (Isup)	0.75mA
Neg Supply Voltage-Nom (Vsup)	-15V
Max Dual Supply Voltage	20V
On-State Resistance (Max)	400Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	10pF 19pF
On-state Resistance Match-Nom	15Ohm
Switch Time (Ton, Toff) (Max)	275ns, 200ns
Channel-to-Channel Matching (ΔRon)	15 Ω (Max)
Crosstalk	-62dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Switch-off Time-Max	250ns
Signal Current-Max	0.03A
Height Seated (Max)	4.572mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16

MAX4709EPE Overview

Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Through Hole. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. The electronic part provides high-quality output because it has 4 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. It consists of 1 circuits. The datasheets for the 16 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 36V to a switch device. The lowest voltage fed to the electronic component should be 9V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. Integrated with DIFFERENTIAL MULTIPLEXER analog IC.