MAX4711CSE+T

125ns, 80ns SPST - NC 25Ohm DUAL Analog Switches MAX4711 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4711CSE+T
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 233
Description: 125ns, 80ns SPST - NC 25Ohm DUAL Analog Switches MAX4711 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Nominal Supply Current	34μA
Max Supply Current	65μA
Turn On Delay Time	500 ns
Voltage - Supply, Single/Dual (±)	2.7V~11V ±2.7V~5.5V
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	175 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	25Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	59 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	125ns, 80ns
Charge Injection	25pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-87dB @ 1MHz
Switch-on Time-Max	125ns
Switch-off Time-Max	80ns
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	2004
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	25Ohm
Terminal Finish	MATTE TIN
Additional Feature	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V
Max Power Dissipation	696mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Base Part Number	MAX4711
Pin Count	16
JESD-30 Code	R-PDSO-G16
Operating Supply Voltage	5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	11V
Min Supply Voltage	2.7V

MAX4711CSE+T Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around 0°C~70°C TA are extended for operation. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. With a 5V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Multiplexers built on a SPST - NC switching circuit are built. The circuits in this analogue multiplexer number 4. MAX4711 can be used to search for analog multiplexer variants. Analog switches have 25Ohm internal resistance. An abnormal situation would be for the switch device to be supplied with a voltage greater than 11V. A low voltage of 2.7V should be applied to the electronic component. If you put voltage higher than 65μA on the digital multiplexer, damage may occur. There is no problem with using dual supply voltage, but it should not exceed 5.5V. In the case of dual power supplies, you should connect at least 2.7V. A voltage of 5V can be used to operate the electronic component. This electrical component also includes additional features such as CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V.