MAX4712CSE

125ns, 80ns SPST - NO 25Ohm Analog Switches BREAK-BEFORE-MAKE MAX4712 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4712CSE
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 200
Description: 125ns, 80ns SPST - NO 25Ohm Analog Switches BREAK-BEFORE-MAKE MAX4712 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2004
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	25Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V
Subcategory	Multiplexer or Switches
Max Power Dissipation	457mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4712
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	5.5V
Power Supplies	3/5/+-5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	11V
Min Supply Voltage	2.7V
Nominal Supply Current	75μA
Max Supply Current	65μA
Throw Configuration	SPST
Turn On Delay Time	175 ns
Voltage - Supply, Single/Dual (±)	2.7V~11V ±2.7V~5.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	500 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	25Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	59 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	0.2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	125ns, 80ns
Charge Injection	25pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-87dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	125ns
Switch-off Time-Max	80ns
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX4712CSE Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Around 0°C~70°C TA is the extended operating temperature. In total, 16 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. The electronic part body is injected with 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. The multiplexer consists of 4 circuits. Try searching for the analog switch ic with MAX4712 if you are looking for variants. In this multiplexer, the internal resistance is 25Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 11V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2.7V. A digital multiplexer may suffer damage if voltage is applied above 65μA. If put voltage greater than 5.5V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 2.7V should be attached. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. This electrical part is compatible with 5.5V operating voltages. Don’t miss additional features of the electronic component such as: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V.