MAX4712EUE+

125ns, 80ns SPST - NO 25Ohm Analog Switches BREAK-BEFORE-MAKE MAX4712 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4712EUE+
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 743
Description: 125ns, 80ns SPST - NO 25Ohm Analog Switches BREAK-BEFORE-MAKE MAX4712 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2004
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	25Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V
Subcategory	Multiplexer or Switches
Max Power Dissipation	457mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4712
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	3/5/+-5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	11V
Min Supply Voltage	2.7V
Max Supply Current	75μA
Throw Configuration	SPST
Turn On Delay Time	125 ns
Voltage - Supply, Single/Dual (±)	2.7V~11V ±2.7V~5.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	80 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	25Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	59 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	0.2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	125ns, 80ns
Charge Injection	25pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-87dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height	950μm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

MAX4712EUE+ Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. 16 terminations have been made so far. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. 16 pins are injected to the electronic part body. Unlike digital switches, these are based on SPST - NO switching circuits. A total of 4 circuits make up this switch device. MAX4712 can be used to search for analog multiplexer variants. An switch multiplexer with 25Ohm internal resistance has a value of 25Ohm. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 11V voltage to the switch device. Analog switch ics with Dual, Single supply type are cost-effective. 2.7V is the lowest voltage the electrical component should receive. Put voltage above 75μA on the multiplexer to cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 5.5V. A dual power supply should have at least 2.7V voltage attached. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Check out the electrical component's additional features, such as the following: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V.