MAX4713CSE

125ns, 80ns SPST - NO/NC 25Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4713 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4713CSE
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 513
Description: 125ns, 80ns SPST - NO/NC 25Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4713 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2004
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	25Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4713
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	3/5/+-5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	11V
Min Supply Voltage	2.7V
Voltage - Supply, Single/Dual (±)	2.7V~11V ±2.7V~5.5V
Neg Supply Voltage-Nom (Vsup)	-5V
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	25Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	59 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	0.2Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	125ns, 80ns
Charge Injection	25pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-87dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	125ns
Switch-off Time-Max	80ns
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX4713CSE Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around 0°C~70°C TA. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the electrical part body. Based on SPST - NO/NC switching circuits, these analog multiplexers work. This multiplexer is composed of 4 circuits. MAX4713 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 25Ohm. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 11V voltage to the switch device. There should be 2.7V voltage fed to the electrical part below 2.7V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. It is recommended that you attach at least 2.7V to your dual power supply. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE FROM SINGLE SUPPLY OF 2.7V TO 11V.