MAX4721EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4721 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 80ns, 40ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -110dB @ 1MHz |
| Switch-off Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4721EUA+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). Advanced packaging method Tube is used to provide high reliability. In Surface Mount, you'll find this switch device. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. A total of 8 pins are injected into the electrical part body. The analog switch ics are built using SPST - NO switching circuits. It consists of 2 circuits. Using the MAX4721 search parameter, you can discover variants of the switch. For functions related to 8 pins, please refer to the datasheets. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply.
MAX4721EUA+ Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
MAX4721EUA+ Applications
There are a lot of Maxim Integrated MAX4721EUA+ Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- Avionics and Military Systems
- Access Concentrators
- DSLAMs
- Channelized and Unchannelized DS3 applications
- Precision data acquisition
- Voice over IP/DSL – Integrated Access Devices, Smart
- High-Voltage
- Microwave transmission systems
- DVD-R
