MAX4731EBL+
| Parameters | |
|---|---|
| Charge Injection | 7.5pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω (Typ) |
| Crosstalk | -108dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 2V~11V |
| Normal Position | NO |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 9-WFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C |
| Published | 2007 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Output | SEPARATE OUTPUT |
| Pin Count | 9 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2V |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 20pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 85ns, 45ns |
MAX4731EBL+ Overview
Shipping overseas is convenient with the electronic component packed in 9-WFBGA, CSPBGA. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C degrees Celsius. There are 9 terminations totally. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. This electronic part can be found in the 9 series. SPST - NO switching circuits are used in these analog switch ics. It consists of 2 circuits. You can find the functions of the 9 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 11V voltage to the switch device. 2V is the lowest voltage the electrical component should receive. Draining from a single voltage supply, this analog switch requires a voltage of 2V~11V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.
MAX4731EBL+ Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
MAX4731EBL+ Applications
There are a lot of Maxim Integrated MAX4731EBL+ Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Imaging
- Medical systems
- Fiber to the Home
- Audio/video switches
- Channel Banks
- Cross Connects
- Precision data acquisition
- Cable Modem
- HDTV
