MAX4731EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4731 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 11V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 20pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 85ns, 45ns |
| Charge Injection | 7.5pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -108dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 2V~11V |
| Normal Position | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4731EUA+T Overview
Presented in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around -40°C~85°C TA extended. In total, there have been 8 terminations. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. The electronic part body is injected with 8 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. Circuits number 2 make up this analogue multiplexer. Try searching with MAX4731 to find analog multiplexer variants. There is Multiplexer or Switches analog multiplexer like this in the world. This analog switch requires a voltage of 2V~11V to drain from a single voltage supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.
MAX4731EUA+T Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
MAX4731EUA+T Applications
There are a lot of Maxim Integrated MAX4731EUA+T Analog Switches & Multiplexers ICs applications.
- Communication systems
- Modems
- Audio and video routing
- Audio signal routing
- PDAs
- Precision test equipment
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- CSU
- Sample-and-hold systems
- Digital Cross-Connects
