MAX4734EGC+T

25ns, 20ns SP4T 800mOhm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4734 12 Pins 1nA 1.8V 12-VFQFN Exposed Pad

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4734EGC+T
Package: 12-VFQFN Exposed Pad
Datasheet: PDF
Stock: 117
Description: 25ns, 20ns SP4T 800mOhm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4734 12 Pins 1nA 1.8V 12-VFQFN Exposed Pad(Kg)

Details

Tags

Parameters
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	12-VFQFN Exposed Pad
Number of Pins	12
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2004
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	12
ECCN Code	EAR99
Resistance	800mOhm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	1.176W
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4734
Pin Count	12
Operating Supply Voltage	3V
Number of Channels	4
Number of Circuits	1
Max Supply Voltage	3.6V
Min Supply Voltage	1.6V
Operating Supply Current	1μA
Turn On Delay Time	30 ns
Logic Function	Multiplexer
Supply Type	Single
Bandwidth	90MHz
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	800mOhm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	56 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	33pF 117pF
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	25ns, 20ns
Charge Injection	60pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-56dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.6V~3.6V
Height Seated (Max)	0.9mm
Length	3mm
Radiation Hardening	No

MAX4734EGC+T Overview

Presented in 12-VFQFN Exposed Pad, this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 4:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 12. A 4 channel electronic part produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A key feature of the 12 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SP4T switching circuits. The circuits in this analogue multiplexer number 1. Try searching with MAX4734 to find analog multiplexer variants. There is 800mOhm internal resistance in this digital multiplexer. For details about the functions of 12 pins, please refer to the datasheets. Users should never supply a voltage higher than 3.6V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 1.6V. For this multiplexer to operate, 1μA current would be sufficient. An analogue multiplexer drains from a single voltage supply at 1.6V~3.6V. The electrical part can be operated at 3V voltage levels. There are various bandwidths available for data transfer.