MAX4734ETC+T
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Resistance | 800mOhm |
| Terminal Finish | TIN |
| Max Power Dissipation | 1.176W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4734 |
| Pin Count | 12 |
| Operating Supply Voltage | 3V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 1μA |
| Turn On Delay Time | 30 ns |
| Logic Function | Multiplexer |
| Supply Type | Single |
| Bandwidth | 90MHz |
| Turn-Off Delay Time | 25 ns |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 56 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 33pF 117pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 25ns, 20ns |
| Charge Injection | 60pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -56dB @ 1MHz |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
MAX4734ETC+T Overview
The electrical component comes in 12-WFQFN Exposed Pad packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 12. A 4 channel electronic part produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. This electronic part can be found in the 12 series. Multiplexers built on a SP4T switching circuit are built. It consists of 1 circuits. Using the MAX4734 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 800mOhm. To find out what the functions of 12 pins are, please refer to their datasheets. Users should never supply a voltage higher than 3.6V to a switch device. An effective Single supply digital multiplexer. 1.6V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 1μA current. This analogue multiplexer requires a voltage of 1.6V~3.6V when it drains from a single voltage supply. 3V operating voltages can be used with this electrical part. It is possible to transfer data over a 90MHz-bandwidth.
MAX4734ETC+T Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
Bandwidth: 90MHz
MAX4734ETC+T Applications
There are a lot of Maxim Integrated MAX4734ETC+T Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Frame Relay Equipment
- Fiber to the Home
- Medical systems
- Industrial control systems
- Switching Systems
- Signal routing between systems
- Residential Gateways, Home Gateway/Router
- Audio and video switching
- Video signal routing
