Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
10 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2004 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4734 |
Pin Count |
10 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3/3.3V |
Number of Channels |
4 |
Number of Circuits |
1 |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
-3db Bandwidth |
90MHz |
On-State Resistance (Max) |
800mOhm |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
56 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
33pF 117pF |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
25ns, 20ns |
Charge Injection |
60pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-56dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
30ns |
Switch-off Time-Max |
25ns |
Voltage - Supply, Single (V+) |
1.6V~3.6V |
Length |
3mm |
RoHS Status |
ROHS3 Compliant |
MAX4734EUB+ Overview
Shipping overseas is convenient due to the electrical component's packing in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 4:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 10. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. There is an electrical component included in the 10 series. Multiplexers built on a SP4T switching circuit are built. There are 1 circuits in this multiplexer. Try searching with MAX4734 to find analog multiplexer variants. You can find the functions of the 10 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. The voltage required by this switch device is 1.6V~3.6V, draining from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board.
MAX4734EUB+ Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 90MHz
MAX4734EUB+ Applications
There are a lot of Maxim Integrated MAX4734EUB+ Analog Switches & Multiplexers ICs applications.
- Cross Connects
- PDH Multiplexers
- Medical Instrumentation
- Audio signal routing
- Mechanical reed relay replacement
- Communications systems
- High speed data transmission line cards
- E1 Network Equipment
- Audio/video switches
- Optical Applications