MAX4734EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4734 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3/3.3V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| -3db Bandwidth | 90MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 56 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 33pF 117pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 25ns, 20ns |
| Charge Injection | 60pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -56dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 30ns |
| Switch-off Time-Max | 25ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4734EUB+T Overview
Due to its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Operation at a temperature around -40°C~85°C TA. 10 terminations have been made so far. This electronic part offers high-quality output due to its 4 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 10 series of products. Circuits based on SP4T switching are used to construct these analog switch ics. It consists of 1 circuits. If you are looking for variants of the digital switch, trying search with MAX4734. It is a typical Multiplexer or Switches analog multiplexer. An analogue multiplexer drains from a single voltage supply at 1.6V~3.6V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
MAX4734EUB+T Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 90MHz
MAX4734EUB+T Applications
There are a lot of Maxim Integrated MAX4734EUB+T Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Intelligent PBX
- DSLAMs
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- T1/E1 Terminals
- Voice over IP/DSL – Integrated Access Devices, Smart
- Modems
- PCMCIA cards
- DVD-R
- Digital access cross connects
