MAX4736EGC+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4736 |
| Output | SEPARATE OUTPUT |
| Pin Count | 12 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 130MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 52 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 33pF 60pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 20ns |
| Charge Injection | 60pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -78dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.6V~4.2V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4736EGC+ Overview
Presented in 12-VFQFN Exposed Pad, this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. There are 12 terminations totally. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 12 pins. The analog switch ics are built using SPDT switching circuits. Circuits number 2 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4736. For functions related to 12 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. A voltage of 1.6V~4.2V is required for this switch device, which drains from a single voltage source. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
MAX4736EGC+ Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 130MHz
MAX4736EGC+ Applications
There are a lot of Maxim Integrated MAX4736EGC+ Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Private Branch Exchange (PBX)
- Industrial control systems
- Channel Banks
- DSUs
- High speed data transmission line cards
- Medical Instrumentation
- ISDN NT1/TA
- CSU
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
