MAX4736ETC+

25ns, 20ns SPDT 800mOhm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4736 12 Pins 1nA 3V 12-WFQFN Exposed Pad

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4736ETC+
Package: 12-WFQFN Exposed Pad
Datasheet: PDF
Stock: 687
Description: 25ns, 20ns SPDT 800mOhm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4736 12 Pins 1nA 3V 12-WFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	12-WFQFN Exposed Pad
Number of Pins	12
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	12
ECCN Code	EAR99
Resistance	800mOhm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	444mW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4736
Output	SEPARATE OUTPUT
Pin Count	12
Power Supplies	1.8/3V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	3.6V
Min Supply Voltage	1.6V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Turn On Delay Time	30 ns
Supply Type	Single
Turn-Off Delay Time	25 ns
-3db Bandwidth	130MHz
On-State Resistance (Max)	800mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	52 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	33pF 60pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	25ns, 20ns
Charge Injection	60pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-78dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.6V~4.2V
Height Seated (Max)	0.9mm
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4736ETC+ Overview

Packed in 12-WFQFN Exposed Pad, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tube. Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. A total of 12 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 12 pins. SPDT switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. Try searching with MAX4736 to find analog multiplexer variants. A 800mOhm internal resistance characterizes this multiplexer. Please refer to the datasheets for 12 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 3.6V. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 1.6V. This digital switch can be operated with a current of 1μA. Using a single voltage supply, this switch device consumes 1.6V~4.2V volts. There are SEPARATE OUTPUT outputs on this analog switch ic.